Meet ANSI, BIFMA, DIN and GSA Structural Standards.
20,000#. Capacity Apron (Strong Cold Rolled Steel).
25-Year Unconditional Warranty.
Fast and Easy Assembly.
Factory Assembly Available.
Save Over 60% On Shipping With This Model.
14-Gauge, 3" Square Legs.
1-3/4" Thick Laminated Top.
Bench Frame Steel 16-gauge.
2" x 3" Rectangular Frame Tube.
Butcherblock Grading.
Available 24”, 30”, 36”, 48” Deep and Custom.

Note: Our maple butcherblock tops are generally treated with oil for industrial assembly applications.

Preferred for its hard surface, beauty and durability, the Solid Maple Butcherblock used by BenchPro™ is made from 1-3/4 thick strips of genuine Maple Hardwood. To prevent warpage and splitting, the wood is dried in a low-heat atmosphere for almost one year before it is cut into strips and glued edge to edge. The hardwood strips vary in width so that some strips are single and some strips are double wide. This gives the tops added strength while reducing the possibility of the top splitting along its seams.

Our stock over 500 Maple Butcherblock tops is sufficient to cover most larger orders. We receive unfinished tops in truckload quantities direct from the mill. We first size and sand them, then round the edges, and then finish them in either an oiled or lacquered finish. (While lacquer finished tops have a nicer appearance for offices, the less expensive oiled finish is generally best for production and high use areas, as they can be resurfaced easily.
Most of our competitors use Ash, Alder, or combinations of other less expensive woods depending on the market price. Some don't round the edges or finish the ends.

! The longer the table, the weaker the table. To counter this, our eight foot long benches have 66% more steel in the understructure while ten foot long benches have 207% more steel there. These longer tables, even reinforced to this extent, will show some minor deflection in the center due to gravity.

Workbench Warranty

PRINT

Workbench Warranty

BenchPro™ has been producing the nation's strongest, longest lasting ergonomic workbenches since 1987. We are so sure our products will perform properly, we offer the following warranty:

BenchPro™ benches, options and accessories are warranted to the original purchaser for 25 - years. This includes every component and every function.

Exceptions:

Polk and Eisenhower series are warranted for ten years.

Workbenches used in multiple shift operations shall have the warranty prorated accordingly.

Hydraulic bench lift - system components are warranted for ten - years.

All lighting products are warranted for ten - years.

For Service: Call BenchPro™ at 888-700-9888 or email info@benchpro.com. Customers only have the obligation to report the problem and BenchPro™ will take care of the rest.

BenchPro™ will either refund the entire purchase price including freight and tax (if any) or replace the product or component that is defective, and pay for the freight.

Product Returns:

As we make all orders from base materials, we charge a "restocking charge" on unneeded products. We also charge a restocking charge for products ordered but cancelled after the product is built. This is to cover our repackaging and handling. Customers pay the cost of return freight.

Restocking charge schedule:

A. Kennedy, Roosevelt Series in standard sizes and colors will be charged 10%.
B. Any bench in a custom size or color will be charged a 50% restocking charge, as we will have a difficult time reselling them.
C. Chemical Resistant tops will be charged an additional 10% restocking charge, above those listed above.
D. Custom and non-catalogue items are non-returnable.
E. No product shall be returned after 90 days.

No return of defective product is ever required. (We may ask for an electronic photo in cases where we have not seen the problem before).

From the lawyers: In no case shall BenchPro™, its distributors, employees, related divisions, and other entities be responsible for any direct, consequential or indirect damage caused by the use, inability to use, or incorrect use of our products. Our liability shall be limited to replacement of product or a full refund.

Due Diligence: Please, if a chair or workbench is found to be defective in a way that could lead to an accident, take it out of service and tag it as dangerous until replacements or replacement parts are received and assembled. Dangerous products should not be put into open waste disposal systems until they have been made unusable, so that no third party can reclaim them and be injured.

Ease of Assembly

Harding Series Bench Assembly.

We are the Only National Workbench Manufacturer that Welds the Frame Together and Assembles it to the Top.

1. Place your new workbench on top of a table with the cardboard seam facing up. Open the carton. Do not remove the cardboard yet. If you ordered drawers or CPU holders, assemble them before the legs. (Go to their individual web site pages for instructions if needed. (benchdepot.com)

2. Position the legs. If you have a lot of benches to do, we recommend two man teams. If you have Static Control benches, make certain the wrist strap jack is on the front side of the leg.

3. Insert two screws with lock washers into each leg.

4. Tighten until lock washer is flat. It doesn't have to be tighter than that.

5. You're done. Turn it over. Its easier and safer with two men. Toss out the cardboard.

(858) 755-4703

Harding Series - Extreme Heavy Duty with 1 3/4" Thick Top Solid Maple Oiled Butcher Block - Round Front Edge.

Workbench Warranty

Harding Series Bench Assembly.